Striking and Cutting Tools

3/4" Flat Chisel 18" Long

3/4" 11" Long Flat Chisel

3/4" Flat 7" Long Chisel

Separates Spot Welded Panels. Use to separate panels after the spot weld has been drilled out. Drive the blade with a hammer from the end or the side through the panel seam. Panels are separated without damage. The blade is sharpened on three sides, and...

Automatic Firing Action. Automatic action fires to create a dimple when downward pressure is applied. No hammer is needed. Works on metal, plastic, wood and other materials. Pressure can be varied by turning the knurled knob. Hardened tool steel tip is...

CTA Tools 5160 pry tool strong yet flexible design is ideal for many automotive repair applications. Designed to be used on painted surfaces withouth scratching like steel pry tools might. • 400mm long • Use on Instrument Panels, Door...

Removal of bezels, moldings and dash emblems, interior door panels, plastic trim along with removal and installation of weather striping without scratching painted surfaces. Non-marring wedge design with 1” blade with curved clip end allows for easy...

Designed to cut holes and internal radius in gaskets and other soft material such as rubber, lead foil, linoleum, felt fiber and other similar materials. Contains long driving mandrel. Ten punch sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4",...

4 PIECE BRASS PIN PUNCH SETd 3/8" x 6". Contains 4 sizes of drift pin style brass punches: 1/8" x 4", 3/16" x 4", 1/4" x 4" and 3/8" x 6". Softer brass will not mar harder metal surfaces. Non-sparking. Knurled handles for better gripping.

3 PIECE BRASS DRIFT PIN SET Contains 3 sizes of drift pin style brass punches: 1/2" x 7", 5/8" x 7" and 3/4" x 8". Softer brass will not mar harder metal surfaces. Non-Sparking. Knurled handles for better gripping.