Measuring

This torque wrench digitally tracks torque and angle measurement. Multiple alerts are produced when the target torque is reached to prevent over-torqueing of bolts. Handle vibrates, buzzer sounds and LCD screen alerts when the target torque is reached. ...

Accurate to 2 percent of the reading from 20 percent of full scale to full scale clockwise and counterclockwise. Wide range of scales makes selecting the appropriate tool easy. The only wrench that is not affected by the hand-hold position on the wrench...

1” indicator set has an IP54 rated water resistant indicator. Stem and back are sealed. Magnet has on/off switch with 85 lb pull for stability. Revolution counter and tolerance clips included on indicator.

Palm-Fit Handle Pivots on Beam to Maintain Constant Distance From Drive Point to Load Point for Precise Measurement Accurate in Clockwise Direction +/- 7% from 20% to 100% of full scale Serviceable By Bending Pointer to Zero Before Use

Palm-Fit Handle Pivots on Beam to Maintain Constant Distance From Drive Point to Load Point for Precise Measurement Accurate in Clockwise Direction +/- 7% from 20% to 100% of full scale Serviceable By Bending Pointer to Zero Before Use

Palm-Fit Handle Pivots on Beam to Maintain Constant Distance From Drive Point to Load Point for Precise Measurement Accurate in Clockwise Direction +/- 7% from 20% to 100% of full scale Serviceable By Bending Pointer to Zero Before Use

Digitally Tracks Torque Measurement. Multiple Alerts When the Target Torque is Reached Prevent Over Torqueing of Bolts. Handle Vibrates, Buzzer Sounds & LED Light Shows Solid "Target Torque Alert" Gives a Warning as the Target Torque Setting is...

Ease of Use: When the target torque is reached:Handle vibrates, Beep tone sounds, Solid Red LED light Screen displays 5 Torque Measurement Units Available :Nm, ft-lb, in-lb, kgf-m, kgf-cm. Increments of measurement : 0.1 Nm, 0.1 ft-lb, 1 in-lb, 0.01...

Temp Range: -58ºF to 1202ºF (-50ºC to 650ºC) Built-in laser pointer Automatic Selection 0.1ºC/1ºF ºC/ºF switchable button Emissivity 0.95(fixed). Automatic Data Hold & Auto power off D:S ratio:8:1 Backlit LCD display Max and Min function

Professional grade 3/4" drive reversible clicker type torque wrench. Measures from 100 to 600 ft.-lbs. in 1 pound increments. Torque wrench body engraved with ft.-pound and Newton-meters. Accuracy: 4% +- meets standards for torque wrenches. Heavy duty...

Easy to read analog scale for setting torque in Foot-Pounds and Newton-Meters Torque Range: 100 to 600 ft/lbs

Central Tools 3D102 Dial Indicator Set with On/Off Magnetic Base Range 0-1 inch Graduations 0.001 inch Flex arm on/off magnetic base Packaged in a plastic case