Engine & Battery

This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly.  For use on Detroit Diesel Series 60 and two cycle 92 engines.  Similar to J35686B

Fully automatic operation 40/20/2/230A 40 Amp 12V fast charge rate 10 Amp 12V medium charge rate 2 Amp 12V low charge rate 20 Amp 24V fast charge rate 2 Amp 24V low charge rate 230 Amp 12V engine starting assistance Digital display with 7-segment...

Services the timing system on 4.0 L SOHC V6 Engine. Required for replacing the timing chain when the poorly designed original Teflon chain guides fail. Signs of failure are heard as a louder engine note during a cold start and between 2400 - 3000 RPM...

Removes the front seal and wear ring from crankshaft. Similar to 303-1260.260. Applications include: 2008-2010 Ford F-250, F350, F450, F-550 6.4L Ford Powerstroke engines VT365-MaxxForce7 Navistar International

Model PL4020 is a perfect charger to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. It features four independent output channels designed to properly charge a flooded or AGM (including...

Locks camshafts and crankshaft in position when servicing the timing chain and setting engine timing A properly working timing system allows the engine's valves to open and close at the proper times during each cylinder's intake and exhaust strokes...

Chrysler 3.6L Timing Chain Tools   The CRY360 includes 2 Camshaft phaser locks (left and right banks) three timing chain holders (one left bank and two right hand versions) and tensioner pins. The CRY360 includes 2 Camshaft phaser locks (left and...

Set includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups. With the head removed, the slide hammer adapter can be installed to pull the injector sleeve. The brush set properly cleans the...

The OTC 6887 Crankshaft Front Seal and Wear Ring Installer installs the front seal and wear ring on crankshaft. It's designed to eliminate lip flare on the wear sleeve and installs the seal properly. Use OE part number 303-1158 for 4.5L installation...

Removes transmission extension housing bushing. The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing. Similar to 308-070. Applications include Ford Ranger transmissions: 4R44E/4R55E ...

Removes fuel injectors from engine. The puller legs align around the injector base and the collar is slid down to firmly grip the injector. A slide hammer attaches to the puller, which is used to pull the injector from its seat. The injector puller...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timing chain holders Applications: 2011 and newer Chrysler, Dodge & Jeep models Compare to factory tool...