Free Shipping Within USA Starting at $199

Time-Sert

TIME-SERT 1610E2 M6x1.0 Extended Metric Thread Repair Kit

(2 reviews) Write a Review
SKU:
'1610E2
Condition:
New
Availability:
Discontinued
Weight:
1.10 LBS
$199.99

Description

The 1610E2 has been discontinued. Some customers use the 1610 kit with a 16107 insert (shorter tooling, will need to be extended). 

Dodge sprinter / Mercedes injector hold down clamp bolt 
BIG-SERT OVERSIZED

If you have a broken bolt at the bottom of the hole the 5812D will also take care of that problem. We now put an oversized BIG-SERT at the top of the head but you must use a larger M8x1.25 grade 8 bolt you can purchase separately at your local hardware or parts store.

 

TIME-SERT 1610E2 M6x1.0 Metric Thread Repair Kit. Inserts included are 17mm.

This kit is typically used in Mercedes injector clamp bolt thread repair. This is commonly used in Dodge sprinter stripped injector hold down clamp bolt.  

The tooling is special in that it needs to go down a long 4 inch depth hole.

Time-Sert Metric Thread Repair Kits

Click the following to see the 1610E pdf Instructions
This tooling has been used in deep hole repair where the hole diameter is 8mm or .315 inches. 
There is no counterbore included in the tooling as the diameter of the hole will allow the insert flange to set at the bottom of the hole where the original threads start. Drill 6" inches , Tap 4" inches, Driver 4" inches, 5 inserts 17mm length.
Instructions:
Drill:
Drill to the full depth of the hole. 
Tap:
Tap the hole to the full depth.
Driver:
Before installing the insert with the driver tool place the tool in the hole and mark it with an ink marker or piece of 
tape to have a visual aid as to not bottom the tool in the hole.

Use a few drops of oil on driver tool, this can be a 30wt motor oil. Screw the insert onto the driver and into the prepared hole. The driver tool will start to tighten up as it expands the bottom few
threads of the insert locking it in place.

KIT CONTAINS

 Drill

 Tap

 Installation Driver

 5 Steel Inserts M6x1.0 Metric

 17mm Length Inserts PN 16107

Time-Sert Metric Thread Repair Demonstration Video 

 

Also notice our bulk discount prices on TIME-SERT replacement inserts for thread repair kits. Need more information on TIME-SERT thread repair kits? Visit our auto repair blog section on thread repair kits for tips, advice and all your thread repair questions answered. Just comment and we will be quick to respond.

See the pdficon-small.png TIME-SERT products pdf for more information on thread repair kits and inserts. Some are listed for certain applications on cars, trucks and motorcycles. The pdf is a partial application list so feel free to email or call if we can assist with your particular need. We also accept inquiries regarding our daily TIME-SERT specials. Remember TIME-SERT is recommended by leading car manufacturers like the General Motors Corporation. In fact TIME-SERT is GM's only authorized repair for head bolt threads.

View AllClose

2 Reviews

  • 5

    Saved my van

    Posted by Brian K on 8th Feb 2018

    Just what we needed to get the blown injector back into my Dodge Sprinter van. People were great and shipping was fast.

  • 5

    Saved my day on a sprinter!

    Posted by MItch W. on 10th Feb 2017

    This kit bailed me out on some stripped out injector hold down bolts on a 2005 Dodge Sprinter.

View AllClose