TIME-SERT 0128 NPT 1/8-2 Honda Oil Sending Unit Thread Repair Kit

Specialty oil pressure switch thread repair kit for Honda Motors 1/8-28 BSBP, uses PN 01281 inserts. Installs a solid thread repair insert in the engine to accept the factory NPT National Pipe Taper oil sending unit. Basic instructions below.

Warning -
Cutting tools may shatter if broken. The wearing of safety glasses is required in the vicinity of their use.
1. Drill out old threads, keeping drill square to the surface of the hole.
2. Counterbore the hole to the full depth permitted by the tool.
3. Tap new threads into the full depth of the drilled hole, while holding tap square to the surface.
THOROUGHLY CLEAN AND DRY THE HOLE.
4. OIL THE THREADS of the insert driver tool.
Screw an insert onto the driver. Apply a small amount of loc-tite (271 or 277) (If High temperature use 266) on the outside threads of the insert. Then screw the insert into the prepared hole until the top of the threaded section of the driver tool is level with the top of insert.

Notice our bulk discount prices on TIME-SERT replacement inserts for thread repair kits. Need more information on TIME-SERT thread repair kits? Visit our auto repair blog section on thread repair kits for tips, advice and all your thread repair questions answered. Just comment and we will be quick to respond.

See the  TIME-SERT products pdf for more information on thread repair kits and inserts. Some are listed for certain applications on cars, trucks and motorcycles. The pdf is a partial application list so feel free to email or call if we can assist with your particular need. We also accept inquiries regarding our daily TIME-SERT specials. Remember TIME-SERT is recommended by leading car manufacturers like the General Motors Corporation. In fact TIME-SERT is GM's only authorized repair for head bolt threads.