Free Shipping Within USA Starting at $199

SERVICE SOLUTIONS U.S. LLC

OTC 6688 6M IV-5/6 Cam Tool Holder Set Includes EN-46105's

(No reviews yet) Write a Review
SKU:
OT6688
UPC:
'731413544255
MPN:
6688
Condition:
New
Availability:
In Stock
Weight:
11.10 LBS
Shipping:
Calculated at Checkout
  • 6M IV-5/6 Cam Tool Set
  • Number 527051 like the Kent Moore J-42038. The OTC-6688 includes 2 Camshaft Holding Tools used on 2001-2002 3.5 Liter Vin H, Oldsmobile Aurora and 1999-2002 Liter Vin H, Oldsmobile Intrigue. Holds camshafts at T.D.C. to ensure proper timing when servicing cam, gears, chains, etc. J-42038 consists of two plates that locate on flats on the ends of the shafts. One used on each cylinder.
  • Number's 536584 and 536585's (one of each) is equivelant to Kent Moore EN-46105 which are the two camshaft holding tools shown below. EN-46105 set of metal plates are positioned over the ends of the camshafts to prevent rotation during timing chain service. The plates are oversized to prevent the valve covers from being installed should the tools be accidentally left on the engine. Note: 2007 and newer with SIDI (Spark Ignition Direct Injection) use EN-48383. Application for Kent Moore EN-46105 or 536584 and 536585 equivelant. 2002-2004 4.2 Liter Vin S used in Oldsmobile Bravada. 2004-2006 4.2 Liter Vin S used in Buick Ranier. 2002-2007 4.2 Liter Vin S used in Chevrolet TrailBlazer, GMC Envoy. 2004-2007 3.5 Liter Vin 5 used in Chevrolet Colorado, GMC Canyon.
  • Timing Chain Retention Tool Set EN-46108. EN-46108 is designed to support the timing chain to prevent it from falling into the engine. EN-46108 consists of right and left support tools to prevent the chain from falling. Numbers 536589's and 53690's (two of each included) are equivelant to the Kent Moore EN-46108 Applications: V6 High Feature Engine EN-46108 is designed to support the timing chain to prevent it from falling into the engine. EN-46108 consists of right and left support tools to prevent the chain from falling. 2004-2007 2.8 Liter VIN T Cadillac CTS 2007 2.8 Liter VIN T used in Saab 9-3 2005-2007 3.6 Liter VIN 7 Buick Lacrosse, Cadillac STS 2004-2006 3.6 Liter VIN 7 Buick Rendezvous 2004-2007 3.6 Liter VIN 7 Cadillac CTS, SRX 2007 3.6 Liter VIN 7 Pontiac G6, GMC Arcadia, Saturn Aura and Outlook
  • The OTC 536187 and 536186 are like the Kent Moore J-44217 Timing Chain Retension Tools Description: GMT360, 4.2L Engines. J-44217 is designed to support the timing chain to prevent it from falling into the engine. GM Reference Number: EN-44217 Applications: RAINER W/ 4.2L 6CYL
  • Crankshaft Socket EN-46111 536588 Application: V6 HIGH FEATURE ENGINE The 3.6L V6 does not use a traditional key for the balancer. EN-46111 is a special socket with a wedge to engage the relief cut to allow rotation of the engine when required for service with the balancer removed. 2004-2007 2.8 Liter VIN T used in Cadillac CTS 2007 2.8 Liter VIN T used in Saab 9-3 2005 - 2007 3.6 Liter VIN 7 used in Buick Lacrosse, Cadillac STS 2004-2006 3.6 Liter used in Buick Rendezvous 2004-2007 3.6 Liter VIN 7 used in Pontiac G6, GMC Arcadia, Saturn Aura and Outlook
  • PN 527055 Like Kent Moore J-43032 - CRANKSHAFT SOCKET For 3.5L & W engines. The crankshaft must be rotated to TDC during various service procedures. The front end of the LX5 crankshaft features a relief cut to allow for clockwise rotation. J 43032 features special tab that engages in the relief cut while piloting over the crank end. With the balancer off, position J 43032 on the end of the crankshaft and rotate with a 1/2" drive ratchet.
  • 2001-2002 Oldsmobile Aurora 3.5L vin H Cam Gear Holding Fixture 527052 J-42042 Used when performing any valve or cam related services that requires removal of the cam gears, timing position must be maintained. 2001-2002 Oldsmobile Aurora 3.5L vin H
  • 2004-2005 Saturn Vue 3.5L vin 4 Camshaft Holding Tool 536583 EN-46337 L66 Engine (VUE only)
  • 2004-2006 Chevrolet Colorado and GMC Canyon 2.8L Camshaft Sprocket Holding Tool 536181 J-44222
  • 2004-2006 Chevrolet Colorado and GMC Canyon 2.8L Camshaft Holding Tool 536172 J-44221 2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). Holding the camshafts at T.D.C. to ensure proper timing when servicing cams, gears, chains, etc. is important. J-44221 is a metal plate positioned over the ends of the camshaft to prevent rotation. GM Reference number EN-44221.
  • 2001-2004 Chevrolet Tracker 2.5L Timing Chain Tensioner Pin 536586 EN-46330. EN-46330 retains the timing chain guide in a compressed position away from the chain to allow timing chain and gear removal and installation. If the tensioner is not held away from the chain, removal is difficult at best, and installation is impossible. Failure to use EN-46330 will result in component damage. 2006 C/K, S/T SUV, H2, Corvette, GTO, Gen IV/Gen V V8 engines
  • 2005-2006 Buick Lacrosse 3.6L vin 7 Timing Chain Tensioner Pins 536587 EN-46112 Timing Belt Tensioner Retaining Pin Set EN-46112 536587 Applications: V6 HIGH FEATURE ENGINE The timing chain tensioners must be held in a retracted position prior to installation onto the engine assembly. EN-46112 is a set of special harden pins inserted into each tensioner to retain it in a compressed state. 2005-2006 Buick Lacrosse 3.6L vin 7 2004-2006 Buick Rendezvous 3.6L vin 7 2004-2006 Cadillac CTS 3.6L vin 7 2005-2006 Cadillac STS 3.6L vin 7 2004-2006 Cadillac SRX 3.6L vin 7 2004-2006 Cadillac CTS 2.8L vin T
  • 2002-2005 Chevrolet Cavalier 2.2L vin F Timing Chain Tensioner Loading Tools 527061-1 & 527061-2 J-45027 The timing chain tensioner must be retracted before the tensioner can be installed on engines. J-45027 is used to retract the timing chain tensioner prior to installation into the engine block. Unapproved methods will damage the tensioner.
  • 2004-2005 Saturn Vue 3.5L vin 4 Timing Belt Tensioner Retainer 536582 EN-46331 L66 Engine (VUE only) - - Engine Kit EN47556
  • OTC 6688
$363.59

Description

  • Comprehensive tool kit designed to save time when servicing GM 6-cylinder engines.
  • Tools are actually easier to use than the original OE essential tools.
    • View AllClose

    Related Products

    Related Products

    On Sale
    GM 1-4 CAM TOOL SET
    Quick view

    OTC-6685 GM In-line 4-Cylinder Cam Holding Tool Set

    OTC Tools & Equipment

    Now: $269.99
    Was: $449.99
    Brand: OTC Required tools to service many timing chains on 1987-2012 GM 4 cyl. overhead cam engines. Some of the tools listed are for the Ecotec engine found in many GM and Saab vehicles, along with...