Open Stock

Here’s a tool that fits most models of compact and standard-size cars and light trucks. It has a four-position feature and 360° rotation that lets you locate the tool to grip the sleeve correctly, even when access is limited.

Pulling Hook

Consists of one Pitman arm and four tie rod tools in a blow-molded storage case.

3/8" Drive T50 Torx Socket

3/8" Drive T45 Torx Socket

1/4" Drive T30 Torx Socket

Releases plastic quick-connect fittings on air conditioning lines at the evaporator on Toyotas. Easy to use: rotated plastic fitting, insert tangs into two release holes and push.

1994-newer Ford 3/4 and 1-ton trucks, Super Duty trucks Vans with 7.3L direct-injected turbocharged (DIT) diesel engine.

Specially designed for separating quick-connect fittings on heater lines of 1999–2004 Chevy and GMC C/K trucks. Tool snaps around the hose and simultaneously depresses the locking tabs to disengage the fitting. Similar to Kent-Moore J-43181.

Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job.

T30 Torx Tamper Bit 1/4"

Quickly and easily locate any malfunctioning fuel system component, including fuel filters, pressure regulators, fuel lines, and fuel pumps without removing it from the vehicle. Features and benefits: Large, easy-to-read 0-100 psi scale, 0-700 kPa. Solid...