Measuring

Accurate in Clockwise Direction +/- 3% from 20% to 100% of full scale Meets ISO 6789 Specifications and is calibrated on test equipment complying with accuracy requirements of ASME B107.300-2010 Meets or Exceeds ASME B107.14M 1994 Ratcheting Head Flexes...

120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines Digitally tracks torque and angle measurements. Vibrating...

+/-3% CW & +/-5% CCW accuracy. 30-250 Ft/Lbs. and 47.5-345nm Exceeds accuracy range set in ASME B107314-2004 standards. 1/2" drive 36 tooth quick release reversible ratchet. Calibration Certificate included, 100% traceability.

120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines Digitally tracks torque and angle measurements. Vibrating...

30-250 Ft/Lbs. Torque Wrench for Wheels 1/2" Drive Includes NIST traceable cert Push through square drive instead of reversible ratchet Asymmetric design of internal components for additional durability Rubber overmold lock collar for superior grip...

120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines Digitally tracks torque and angle measurements. Vibrating...

3 Modes of Operation: Peak Torque, Angle, and Peak Angle (torque and angle) Torque Accuracy 2% CW, 3% CCW in 20 - 100% range Angle Measurement Function 5 - 999 Degrees 15 Degree Flex-Head for Access 5 Torque Measurement Units: Ft-lb, In-lb, Nm, Kg-m,...

GEARWRENCH Patented 120XP Head Provides a 3° Ratcheting Arc Accurate in Clockwise Direction +/- 3% in Upper 80% of the Range Enclosed Ratchet Head Design for Extreme Resistance to Dirt Infiltration Low Profile Teardrop Head with Flush Mounted On/Off...

120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces Torque accuracy of +/- 3% CW in the upper 80% of wrench capability delivers high performance Enclosed ratchet head design resists dirt infiltration for continuous and efficient...

Formed low-profile tubes Accuracy Tested and Certified to 3% +/- High definition scale in SAE and Metric Dependability Lifetime warranty on ratchet heads Exceed ANSI specifications on load and cycle 100% All Steel construction Rear Palm support for...

This torque wrench digitally tracks torque and angle measurement. Multiple alerts are produced when the target torque is reached to prevent over-torqueing of bolts. Handle vibrates, buzzer sounds and LCD screen alerts when the target torque is reached. ...

Accurate to 2 percent of the reading from 20 percent of full scale to full scale clockwise and counterclockwise. Wide range of scales makes selecting the appropriate tool easy. The only wrench that is not affected by the hand-hold position on the wrench...