Engine Service

OTC Crank Sprocket Installer Used to install the crankshaft sprocket. Hardened forcing screw may also be used to replace the original 12mm bolt. Includes additional bolt for the 2.7L engine.For use on Chrysler engines: 2006 2.0L DOHC 2006-2010 2.4L, 2...

Used for servicing the Fuel pump drive belt. Tools included are used for securing the high-pressure fuel pump sprocket, holding the crankshaft TDC, removal of the toothed belt pulley and crankshaft turning tool. Services VW, Audi & Porsche 2.7L...

CTA 6 Piece Spark Plug & Glow Plug Socket Set For removal and installation of Spark Plugs, Glow Plugs & Pressure Sensor Glow (PSG) Plugs. Included sizes: 8mm x 6-point, 9mm x 6-point, 10mm x 6-point, 12mm x 6-point, 14mm x 12-point & 16mm x...

Press fit front seal to engine block & crankshaft for proper fitment of inner & outer seal body (works w/ 3878) Services GM/ISUZU 6.6L Duramax 2001+ GMT800, 2500HD & 3500. Installation instructions: Set new seal on inner body of tool Attach...

Dipstick Extractor Kit Ford Dodge GM Extracts broken dipstick tubes on Ford (4.6L, 5.4L, 6.2L & 6.8L), Dodge (5.7L & 6.1L) & GM (4.8L, 5.3L, 5.7L, 6.0L & 6.2L) V8 engines. When the dipstick tube breaks off, a piece remains at entry...

OTC Chrysler EVAP Leak Check Adapter Designed to be used with EVAP system tester. Includes a male tank adapter and female cap adapter connected by a 20" hose. Applications include: 2006-Later Chrysler/Dodge/Jeep vehicles 1999-2003 Mitsubishi Gallant...

CTA Cummins Sleeve Installer Kit - 3.9L 5.9L & 6.7L Use for 3.9L, 5.9L & 6.7L Cummins engines when wear sleeve is installed or replaced Services Paccar PX-6, 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L Includes CTA...

Properly installs the injector seal Services Ford 1.6L, 2.0L, 2.3L, 3.5L, and 3.7 GTDI Engines Compare to Ford Factory Tools 310-207 & 303-1567

Lisle 11 Piece Serpentine Belt Kit This tool is used to remove and install belts on serpentine belt systems using the spring loaded idler pulley. For applications with limited access, 13mm and 16mm sockets are built into the handle. This tool covers...

The folllowing adapters are included: MVA662 Ford Power Steering Adapter; MVA661 GM Power Steering Adapter; MVA660 Universal Power Steering Adapter Featuring a robust design and construction, all three adapters include an inline, barbed connection for a...

Install two bearing cups in one procedure on virtually all medium and light-duty U-joints. Procedure: An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this...

Lisle 3.5L Turbo Ford Timing Tool Updated design is thicker for more strength. Surfaces are precisely machined for an exact fit. The tool helps ensure camshaft alignment during the removal and installation of the timing chain.