Engine Service

Metri Pack Release Tools are available in two sizes and are designed to easily disengage the male terminal from the female housing. Just slide the tip into the housing over the terminal and depress the locking tab to remove the terminal from the...

Disconnect tool is required to remove the fuel line connector from the fuel filter on the GM 5.3L V8 Engine. Applications: Avalanche, Tahoe, Silverado, Savana, Trailblazer and more. Visit ctatools.com for application details.

We quality check all inserts and tooling for manufacturer defects prior to shipping and provide free tech support for our customers at 800-734-8665 x-251. Free tips sent only when purchasing from us at the normal sales price. We will match...

Services the timing system on 4.0 L SOHC V6 Engine. Required for replacing the timing chain when the poorly designed original Teflon chain guides fail. Signs of failure are heard as a louder engine note during a cold start and between 2400 - 3000 RPM...

Locks camshafts and crankshaft in position when servicing the timing chain and setting engine timing A properly working timing system allows the engine's valves to open and close at the proper times during each cylinder's intake and exhaust strokes...

Chrysler 3.6L Timing Chain Tools   The CRY360 includes 2 Camshaft phaser locks (left and right banks) three timing chain holders (one left bank and two right hand versions) and tensioner pins. The CRY360 includes 2 Camshaft phaser locks (left and...

Set includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups. With the head removed, the slide hammer adapter can be installed to pull the injector sleeve. The brush set properly cleans the...

The OTC 6887 Crankshaft Front Seal and Wear Ring Installer installs the front seal and wear ring on crankshaft. It's designed to eliminate lip flare on the wear sleeve and installs the seal properly. Use OE part number 303-1158 for 4.5L installation...

Removes transmission extension housing bushing. The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing. Similar to 308-070. Applications include Ford Ranger transmissions: 4R44E/4R55E ...

Removes fuel injectors from engine. The puller legs align around the injector base and the collar is slid down to firmly grip the injector. A slide hammer attaches to the puller, which is used to pull the injector from its seat. The injector puller...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timing chain holders Applications: 2011 and newer Chrysler, Dodge & Jeep models Compare to factory tool...

The OTC 6867 Hub Seal Installer is used to install the wheel hub oil seal on single or dual wheel axle assemblies. The seal installer adapter is driven with the 7" detachable handle. Applications with Ford, Lincoln and/or Mercury vehicles using the...