Engine Service

Helps to determine the mechanical condition of the engines' cylinders. The digital gauge is easy to read and can display pressures in PSI, kPA, bar and kg/c. It also can measure, record and playback compression readings on up to 12 cylinders, for quicker...

5 Pc. Spark Plug Socket Set includes sizes: #1730 - 5/8” x 12 PT (OAL: 6”) #2380 - 5/8” x 6 PT (OAL: 10”) #2390 - 9/16” x 6 PT (OAL: 10”) #2394 - 14mm x 6 PT (OAL: 10”) #2376 - 14mm x 12 PT (OAL: 2.5”) Visit ctatools.com for individal spark plug socket...

Used for adjusting the camshafts when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to Volvo Factory Tool No. 9997257 Applications: Land Rover, Jaguar and VOLVO S80, XC90, XC60 & XC70

The 5610 professional kit can be used for domestic and import applications. High and low pressure gauges make this kit useful for both transmission and engine work. Kit comes complete with adapter for most applications. Designed to be used for both...

Kit includes #3472 Benz Injector Remover. T-bar/Slide hammer designed for easier removal of the injector nozzle. #2213 Mercedes Benz Injector Nozzle Installer (M278) is for installing the seals on Mercedes Benz & Infiniti fuel injectors. Constructed...

Kit includes both the Camshaft and Crankshaft holding brackets. Designed to position and hold the camshaft and crankshaft on 1993-2004 Ford 4.2L 2 valve, 4.6L 4-valve, 5.4L V8, and 6.8L V10 engines when installing timing chains. Visit ctatools.com for...

Applications include 2009-Later select Ford, Lincoln, Mercury vehicles Similar to OE part number 211-061

Tool is used for Compressing valve springs on the 3.0L without having to remove the head. Applications: Fusion, Milan, MKZ, Escape, Mariner, Five Hundred & Hybrid models. Compare to Factory Tool #303-473

Specially Designed for Removing Plastic Oil Drain Plugs Without Damaging the Plug 4 pc. set for removing plastic engine oil pan drain plugs on many late model Audi, BMW, Ford, Lincoln and Volkswagen Specially designed to slot in and release the drain...

Use to properly install harmonic balancers on Ford EcoBoost engines, as well as other Ford and Lincoln applications The design of the tool allows the user to more easily access the front of the engine Nut and bearing sleeve assembly reduces friction...

Contains styles and sizes to fit domestic and import cars, trucks, and motorcyclesRemove connector pins safely with out damaging wire harnesses or terminal block.

Used for rotating the crankshaft of Cummins equipped vehicles during servicing. Tool passes through the flywheel housing until it engages the ring gear. Use a 1/2 in. ratchet or breaker bar to turn the engine over. (Not for impact use). Supporting...