Chassis

The 20% Thicker Fork Design Provides Extra Lift When Replacing Worn Out Ball Joints, Pitman Arms, Pickup Track Bars and Other Includes five forks: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8". Forks are threaded to interchange with either the handle for...

Releases the Lower Ball Joint on Audi A4 ('07 & up), A5 ('09 & up), A6 ('11 & up), A7 ('10 & up), Q5 ('10 & up). Allows the ball joint to be turned after releasing the pinch bolt. Features 1/2" square drive with 27mm hex & 18mm...

R&R Was Never Easier and Faster Front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle The set eliminates the need for front end alignment once the work is done Use on front...

For removal of most types of pitman arms, tie rods and ball joints found on automotive and light truck applications.

Services Sprinter Ball Joints. Black Finish With 3/4" Square Drive. Od--68Mm, Id--50MmServices Sprinter Ball Joints3/4" Square DriveOd--68Mm, Id--50MmBlack Finish6 Pin Design

Services Benz M-Class (W163/W164) Ball Joints. Black Finish With 3/4" Square Drive. Od--63Mm, Id--50MmServices Benz M-Class (W163/W164) Ball Joints3/4" Square DriveOd--63Mm, Id--50MmBlack Finish4 Pin Design

Use for removing and installing the top shock retaining nut on S40, S60, S70, S80, S90 models Includes holding socket and double-D axle center socket Double-D measures 8mm "flat-to-flat" Use 10mm hex wrench on top of Double-D socket Use 28mm hex wrench...

Special oval shaped bit end services Suspension Strut Housing Nuts found on some VW & Audi models Also fits some BMW, Seat, Renault, Peugeot 3/8" square drive

Press tool removes and installs control arm bushings without having to remove the control arm from the car.See application chart for compatible vehiclesSecond generation (E30; 1982–1994)Third generation (E36; 1990–2000)Fourth generation (E46;...

For lower control arm ball joint service on Volvo S60 ('01 - '10) S80 ('99 - '06) V70 ('00 - '07) XC70 ('02 - '07) XC90 ('03 - up) XC60 ('09 - up) Includes 3 adapters - M12 x 1.75, M14 x 1.5, M14 x 2.0

Holds torsion bar while making adjustments. Services '88 - '03 GMC and Chevrolet 1/2-ton, 3/4-ton & 1-ton pickups, S-10 Blazer, S-15 Jimmy, 4WD pickups w/ 4. 3L V6 engine & '91 - '01 Oldsmobile, Bravada.

Brake Fluid Tester for DOT 4 Determines quality of brake fluid. Measures moisture form 0%-4%. LED lights to show moisture percentage. Automotically shuts off after 12 seconds. 1.5V AAA battery included.