Air Conditioning

and 34700Z","Maximum acid and moisture removalSpin-on filter for 1770 0-2k, 34134A, 34134-2K, 342000, 34234, 34300-2K, 34700Z, 347 00-2K, 34800, 348800-2K, 34900 series Fits machines from 1998 and newer. #RA34430 its machines manufactured prior to 1998."

Maximum acid and moisture removalQuick change filter for Models 17700A, 34450, 34700 series. Fits machines older than 1998. #RA34724 fits machines manufactured after 1998.

Installs in-line on the low side of the manifold Made of durable polypropylene with oil levels marked in ounces and milliliters Solid brass fitting with a Lexan ® hand wheel. *Not recommended for UV dye injection It takes just seconds to transfer an oil...

Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems. The quick-connect design has an integral safety sleeve, which protects against injury and refrigerant loss if the coupler...

High side service couplers with red actuator connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems Quick-connect design has an integral safety sleeve which protects against injury and refrigerant loss...

High side service couplers with red actuator connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems Quick-connect design has an integral safety sleeve which protects against injury and refrigerant loss...

Can also be used for fluorescent dyes. Just fill the barrel with the amount of oil needed (measurements are marked on the barrel body) Connect the injector fitting to the low side access port on the vehicle and press the plunger to deliver the oil...

5 CFM free air displacement. 110-volt, single-stage design. 1/4" flare & 1/2" ACME intake ports. One Year "No-Hassle" over-the-counter replacement warranty. Length: 13.25 inches Width: 5.5 inches Height: 9.75 inches 2 Weight: 18.1 pounds

3 CFM free air displacement. 110-volt, single-stage design. 1/4" flare & 1/2" ACME intake ports. One Year "No-Hassle" over-the-counter replacement warranty. Length: 12.5 inches Width: 5.0 inches Height: 9.25 inches Weight: 15.7 pounds

1.5 CFM free air displacement. 110-volt, single-stage design. 1/4" flare & 1/2" ACME intake ports. "No-Hassle" over-the-counter replacement warranty. Length: 11.25 inches Width: 5.0 inches Height: 9.0 inches

# Psi/kPa pressure readings # R-22 and R-134a temperature readings in degrees Celsius # Replaces 11692

The screened orifice for AC cycling clutches requires this special puller. Use this kit to remove complete or damaged tubes in 1985 and later Ford and GM cars. Comes with an extender body for 1985 and newer Ford models; an adapter for 1989-'91 GM "J",...