MASTERCOOL
ML43060-EV Evap Smoke Machine with internal compressor and
(No reviews yet)
Write a Review
- SKU:
- ML43060-EV
- MPN:
- 43060-EV
- Condition:
- New
- Availability:
- In Stock
- Weight:
- 20.00 LBS
- Shipping:
- Calculated at Checkout
Description
- Diagnose all evap, intake, exhaust, vacuum lines and vacuum components, passenger compartment window and sunroof, headlight/tail-light fixtures and much more. This unit provides the option of compressed air, inert gases and a built-in internal compressor to inject the smoke into the system.
- Accessories include: full set of block off caps, exhaust cone, evap Schrader valve remover/installer, evap service port adapter hose (green cap), high intensity smoke illuminating battery powered flashlight and 8 oz. smoke producing fluid
- Multiple options for smoke injection include built-in internal compressor, shop air and inert gases
- Quick smoke generation
- Built-in safety pressure relief valve
- Built-in pressure regulated at 0.5 PSI for safe evap testing
- Large easy to read pressure gauge 0-30 in. H2O (70 mbar)
- Easy to read and clean flow meter
- Non-toxic and non-corrosive smoke
- 10' 12V power cables with durable clamps
- Heavy-duty 10' smoke injection hose
- Velcro strap for hose and power cable storage
- High intensity, battery operated smoke illuminating telescoping flashlight
Related Products
Related Products
ML43060-TURBO Turbo/Intake Smoke machine with internal compressor and
MASTERCOOL
$778.73
Diagnose all turbo, intakes, exhaust, vacuum lines and vacuum components, manifolds, passenger compartment window and sunroof, headlight/tail-light fixtures and much more. Not for EVAP testing. This...
ML43060-HD HD / Truck Smoke Machine with accessory kit
MASTERCOOL
$985.11
Diagnose HD truck intakes, exhaust, vacuum lines and components, cabin air and water leaks and much more. Not for EVAP testing Accessories Uses shop air or inert gas (does not include compressor)...
ML43065 Dual Evap and High Pressure Smoke Machine Kit
MASTERCOOL
$1,233.04
These units are for evap, turbo/intake and heavy duty truck testing providing a solution to difficult to diagnose automotive leaks. Mobile repairs are now possible as both units include an internal...
OT6787 EVAP Access Port Tool
OTC ROBINAIR BOSCH
$91.51
Diagnose all GM 5/16" EVAP line systems. This adapter connects into the EVAP system line at the canister quick-connect fitting. An EVAP port fitting allows EVAP system testing and diagnosis. Use with...
OT6782 Chrysler EVAP Leak Check Adapter
OTC ROBINAIR BOSCH
$121.41
OTC Chrysler EVAP Leak Check Adapter Designed to be used with EVAP system tester. Includes a male tank adapter and female cap adapter connected by a 20" hose. Applications include: 2006-Later...
LS37160 Fuel Line and Evap Disconnect Pliers
LISLE CORPORATION
$21.44
Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage. Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle...
AHM2010ACP Mercedes Fuel/Evap Angled Hose Clamp Pliers
ASSENMACHER SPECIALTY
$44.08
Fuel/Evap Angled Clamp Pliers for the replacement of new style Fuel/EVAP hose clamps.