Free Shipping Within USA Starting at $199

HORIZON TOOL INC

Calvan 39300 Ford 3-Valve M16x1.5 Sparkplug Insert Installer Kit

(9 reviews) Write a Review
SKU:
CV39300
UPC:
'047084393000
MPN:
39300
Condition:
New
Availability:
In Stock
Weight:
3.90 LBS
Shipping:
Calculated at Checkout
  • Made in the USA with Global Components
  • Comes with eight inserts.
  • Long tooling with hex heads makes deep wells easier to work.
  • Line-up adapter to guide reamer straight.
  • Special 4-Flute reamer for preparing the hole for the tap. *Use E-Clip!
  • Tap with E-clip to insure proper depth.
  • Insert installer used to fully install insert prior to spark plug.
  • Case keeps everything in it's place.
$269.99

Description

shipping-times.jpg

The Cal-Van Tools Three-Valve (3V) Ford Triton Spark Plug Insert Installer Kit. *NOT for 2V engines! If working on a 2-Valve engine see the 38900. If assistance is needed in choosing the correct kit for your application or need faster than 2-3 day shipping please call us at 800-734-8665. PN 39300 is designed to install replacement steel alloy thread inserts on Ford 3V 5.4L and 6.8L engines that are 3V and use the following M16x1.5 spark plug. 

m16x1.5-3v-sparkplug.jpg

Many times when removing spark plugs that typically bread upon removal, the threads may be damaged. When this kit is used the cylinder heads can be serviced in the vehicle saving the vehicle owner thousands of dollars! This also eliminates a long "down time" for the vehicle.

Since steel alloy has a much higher tinsel strength when compared to aluminum, the result is a much stronger set of threads that will likely last the life of the vehicle. This spark plug thread insert kit will allow the user, by using the simple step-by-step instructions (see the video below) to repair damaged threads or spark plug blowouts in 30 minutes or less per cylinder. For replacement inserts see the M16x1.5 393-100 product listing which is also the same for the Snap On Blue Point FRT12 kit Snap On/Blue Point FRT12-INS. *Note we recommend using the Calvan 389-4000 Leak Detector which is available separately, to help determine that the valves are closed before working on the spark plug hole. This helps to prevent valve damage and isolates the cylinder so chips can be blown out without forcing debris further into the engine.

 

Ford 3 Valve Engines with M16x1.5mm Spark Plugs - Please verify engine is 3V with M16 plug. After engine manufacturer date of 11/30/07 (found on cam cover) it's likely that you have a 12mm spark plug. If a M12x1.25 kit is needed see our 4212H. If you don't see your model below see our 2V 38900 kit for more applications.

Avanti II 4.6 L 281 CID V8 SOHC 24 Valve 2006 - 2007

Ford Mustang 4.6 L 281 CID V8 SOHC 24 Valve 2005 - 2008 (up to manufacturer date 11/30/07)

Ford Truck Expedition 5.4 L 330 CID V8 SOHC 24 Valve 2005 - 2008 (up to manufacturer date 11/30/07)

Ford Truck Explorer 4.6 L 281 CID V8 SOHC 2006 - 2008 (up to manufacturer date 11/30/07)

Ford Truck F150 4.6 2009 3V verify M16x1.5 

Ford Truck F150 1/2 Ton - Pickup 5.4 L 330 CID V8 SOHC 2004 - 2007 (*2004 was split year, some have 2V engines)

Ford Truck F150 1/2 Ton - Pickup 5.4 L 330 CID V8 SOHC 2008 (up to manufacturer date 11/30/07)

Ford Truck F250 Super Duty 3/4 Ton - Pickup 5.4 L 330 CID V8 SOHC 2005 - 2008 (up to manufacturer date 11/30/07)

Ford Truck F250 Super Duty 3/4 Ton - Pickup 5.4 L 330 CID V8 SOHC 2005 - 2008

Ford Truck F250 Super Duty 3/4 Ton - Pickup 5.4 L 330 CID V8 SOHC 24 Valve 2005 - 2004 (up to manufacturer date 11/30/07)

Ford Truck F350 Super Duty 1 Ton - Pickup 5.4 L 330 CID V8 SOHC 2005 - 2008 (up to manufacturer date 11/30/07)

Ford Truck F450 Super Duty 1 1/2 Ton Truck 6.8 L 415 CID V10 SOHC 2005 - 2008 (up to manufacturer date 11/30/07)

Ford Truck F53 6.8 L 415 CID V10 SOHC 2007 - 2008 (up to manufacturer date 11/30/07)

Ford Truck F550 Super Duty 6.8 L 415 CID V10 SOHC 2005 - 2008 (up to manufacturer date 11/30/07)

Lincoln Mark LT 5.4 L 330 CID V8 SOHC 24 Valve 2006 - 2008 (up to manufacturer date 11/30/07)

Lincoln Navigator 5.4 L 330 CID V8 SOHC 24 Valve 2005 - 2008 (up to manufacturer date 11/30/07)

Mercury Mountaineer 4.6 L 281 CID V8 SOHC 2006 - 2008 (up to manufacturer date 11/30/07)

There are tips that we have developed over the years that we have been selling this kit. These tips are emailed to our customers after purchase. We will also personally answer questions if needed, but we've found the tips clarify the job. 

At checkout just write "Tips" in the Comments field and we will email the tips when processing the order. Tips - Emailed free after purchase.

Note; We have had several customers concerned because the spark plug seems to go too deep into the insert when they try the spark plug in the insert prior to working on the vehicle. This is because the point at which the spark plug actually "seats" is NOT in the insert, it's in the "head".  pdficon-small.png Calvan 39300 Instructions pdf
 
  • Repairs Ford Triton 3 Valve 4.6L, 5.4L and 6.8L engines from around 2004 to manufacturer date 11/30/07
  • Repairs cylinder with head on in about 30 minutes
  • Patented insert locks into cylinder head
  • Tool repairs Ford 3 valve engines where plug has either blown out or threads are too badly damaged to hold a spark plug
  • Includes Quantity of 8 M16x1.5 Inserts

Tool repairs Ford 3 valve engines where plug has either blown out or threads are too badly damaged to hold a spark plug.

Also Recommended:

JB Weld 8297

Cylinder Leak Tester 389-4000

Note; We have had several customers concerned because the spark plug seems to go too deep into the insert when they try the spark plug in the insert prior to working on the vehicle. This is because the point at which the spark plug actually "seats" is NOT in the insert, it's in the "head". 

Equivalent to the Snap On/Blue Point FRT12 and uses the same FRT1-INS insert. See the Calvan 39300 Demonstration Video Below
 

 

View AllClose

9 Reviews

  • 5

    Fix your Head

    Posted by Bruce B on 11th Oct 2019

    Worked as planned Good tool.

  • 5

    Product did what it said it would do. I am very satisfide

    Posted by Alex P on 1st Jan 2018

    I am happy with this kit

  • 5

    5.4 3 valve spark plug hole repair

    Posted by Greg D. on 23rd Oct 2017

    If you own or work on 5.4 3 valve Ford engines its a must have tool for spark plug hole repairs. You can repair a stripped or damage spark plug hole in less then 20 minutes.

  • 4

    Great tool. Inserts could be better design will recommend tool

    Posted by Jimmy D on 6th Oct 2017

    Great tool will recommend tool inserts bad design but is worth it n need the JB weld along with it . From Management: Thanks for the review. We've been selling these kits with the inserts as they are since 2005 with no issues. We offer 8297 JB Weld and Seal Tite as well as the E-clip for the tap.

  • 5

    Worth every penny

    Posted by Roy on 20th Oct 2016

    Ford acted like they never heard of a plug blowing out of the engine F150 3-valve Triton. Ford said $6000.00 to fix. I researched this tool $147.00 best money I've spent worked like a charm engine runs better than ever. Maybe Corporate Ford should purchase for all there shops

  • 4

    Needs the 389-4000 and JB Weld 8297

    Posted by Justin H on 28th Jul 2016

    Great kit but a bit incomplete without the Calvan 389-400 cylinder leak tester and the JB Weld pn 8297. Would have gave it a 5 if it came with these essential items.

  • 5

    AWESOME!

    Posted by Chris D. on 3rd Jun 2016

    Thank you to the folks at Wise Auto Tools! This thing worked perfectly and as described. A must have for any auto repair service!

  • 5

    Money Saver

    Posted by Patrick B. on 3rd Mar 2016

    I ordered this kit after I had a plug break that left the threaded part in the head. Drilled it out with 1/2" bit deep enough for the reamer in this kit to work. Reamed the hole out and used a Lisle tool to get the electrode out before using the tap and installing the insert. Worked like a champ and saved me many dollars over what the dealership wanted to charge. Great video and tips available with this kit make it easier that I expected.

  • 5

    Ford 3 Valve Sparkplug Insert Installer Kit

    Posted by John F on 26th May 2015

    Worked like a charm. I took my time and had the insert installed in 30 minutes. I recommend it to anyone who has stripped the threads in the spark plug hole. Take your time, follow directions and you'll be up and running in no time.

View AllClose